(0 items, $0.00)
View My Cart
VariZoom Motion Control
Motion Control Accessories
Cinema Pro stabilization / backpan upgrade
Stabilization / Backpan upgrade for Cinema Pro remote head
Using an inertial sensor, this feature is for stabilizing pan and/or tilt. This means if the base is moving the camera platform will retain its position. The pan stabilization feature is often referred to as "backpan" for maintaining heading when moving a boom and for eliminating unwanted motion external to the head. This is not a high-frequency stabilization feature for eliminating jitter or sudden jolting action, it is primarily for backpan, maintaining heading and low-frequency disturbances.
Using an inertial sensor, this feature is for stabilizing pan and/or tilt. This means if the base is moving the camera platform will retain its position. To enable this feature, go to setup menu two then select “Stabilization”. In this menu there will be an enable/disable selection for both pan and tilt. Only after you reset the motor’s power, the stabilization will work.
Using the “Filter” option: If necessary the filter option is used to smooth out the stabilization response. The higher value (0-100) on the filter function, the more you’ll notice the effect.
The “+” and “-” symbols: On the right side of the screen there is two +/- selections for the pan and tilt motors. The +/- selection will change the direction the pan and tilt motors move during compensation. This is for calibrating the stabilization for your motor. If the motor is moving in the wrong direction while it’s trying to stabilize, switch to the opposite symbol.
Drift offset: In some environmental situations the motor may “drift” (move constantly in one direction) after stabilization has been enabled. You should usually give the head a 3-4 minutes to settle before you enable stabilization. After that, you can compensate for “drift” with the values -100-100.
Includes stabilization board and software upgrade
CP HEAD EXTENSION (2")
24V portable power station for CinemaPro line
75' POWER CABLE FOR CP/CPJR
JIMMY JIB ADAPTER FOR CINEMAPRO & JR
Share your knowledge of this product.
Track My Order
Returns / Repairs
Questions? Call us! 512-219-7722
Mon-Fri 8am-4:30pm CST
Copyright © 2014 VariZoom. All Rights Reserved.
All orders are subject to product availability.